小弟初来乍到，分享几个TGNET教程！

duchaoshandong

        小弟正在学习TGNET，基本操作还可以，但是实际应用不理想，不知道各位师兄师姐有没有具体的应用实例，跟小弟分享一下，不胜感激！
         

牛先生

多谢啊  这个是做什么的呢

helloshigy

高级TGNET中文使用教材 目录

第一章水力学基础............................................................................................................................................. 4
一、输气管段流动过程的基本方程........................................................................................................4
二、 输气管段的基本流量公式..............................................................................................................5
三、流态的划分与雷诺数........................................................................................................................5
四．TGNET 中使用的稳态基本流量公式.................................................................................................6
输气管段的水力摩阻系数................................................................................................................................. 6
一、光滑区...............................................................................................................................................6
二、混合摩擦区.......................................................................................................................................7
三、其他阻力系数公式（含阻力平方区）............................................................................................7
气体状态方程................................................................................................................................................... 10
一、气体的状态方程..............................................................................................................................10
二、真实气体的状态方程...................................................................................................................... 11
三、气体状态方程小结..........................................................................................................................13
温度计算.................................................................................................................................................13
一、温度计算选择.................................................................................................................................13
二、总传热系数.....................................................................................................................................14
三、详细传热计算.................................................................................................................................14
四、温度计算比较.................................................................................................................................15
第二章 软件概述............................................................................................................................................. 15
2.1 软件的特点和主要用途...................................................................................................................15
2.2 软件的人机界面...............................................................................................................................15
第三章使用软件的准备工作............................................................................................................................ 19
3.1 建立管网模型文件...........................................................................................................................20
3.2 设置使用的单位制和单位...............................................................................................................24
3.3 设置模拟选项..................................................................................................................................25
3.4 合理选用摩阻公式和管道步长KNOT SPACE .....................................................................................27
3.5 合理选用状态方程..........................................................................................................................28
3.6 打开温度跟踪和气体属性跟踪......................................................................................................28
3.7 设定初始约束条件..........................................................................................................................29
3.8 保存管网模型文件...........................................................................................................................32
第四章稳态模拟的基本步骤............................................................................................................................ 33
4.1 输入气体参数..................................................................................................................................33
4.2 建立管网模型..................................................................................................................................35
4.3 管网模型的有效性检查...................................................................................................................36
4.4 运行稳态模拟和查看计算结果.......................................................................................................37
第五章以批处理方式运行动态模拟的基本步骤............................................................................................ 41
5.1 建立动态脚本，添加必要的约束..................................................................................................... 41
5.2 指定需要的动态趋势和报告的频度................................................................................................. 45
5.3 运行动态模拟.................................................................................................................................... 46
5.4 查看动态模拟报告和趋势报告......................................................................................................... 46
5.5 建立动态趋势图................................................................................................................................ 47
3
第六章交互（互动）式动态模拟.................................................................................................................... 48
6.1 启动.................................................................................................................................................... 48
6.2 控制运行速度和数据刷新时间......................................................................................................... 48
6.3 选择初始状态.................................................................................................................................... 49
6.4 交互命令............................................................................................................................................ 49
6.5 退出命令............................................................................................................................................ 51
第七章 案例研究......................................................................................................................................... 53
1 不同参数如何影响计算流量..............................................................................................................53
2 已知数据DATA .....................................................................................................................................54
3、例题计算...........................................................................................................................................55
4、计算结果...........................................................................................................................................56
5、模拟结论SIMULATION CONCLUSION ........................................................................................................58
6 检查错误.............................................................................................................................................59
7 简单案例研究.....................................................................................................................................60
案例研究.......................................................................................................................................................... 61
一. 管道的储气能力案例研究..............................................................................................................61
二. 调峰分析案例研究。......................................................................................................................63
三. 气源中断、持续时间、及恢复过程案例分析..............................................................................68
四. 压缩机停机及其后果分析案例研究..............................................................................................71
五. 缩机再启动的时机和系统的恢复过程案例研究..........................................................................76
六. 泄漏分析案例研究..........................................................................................................................82
七. 储气、调峰和调压时的温度变化案例研究。..............................................................................87

helloshigy

TGNET中文使用手册——气体管线瞬态和稳态模拟计算软件PIPELINE STUDIO FOR GAS  TGNET

目录

PIPELINE STUDIO培训························································································ 1

生产················································································································· 1

用户················································································································· 1

培训················································································································· 1

1    Lab 1  PIPELINE STUDIO介绍························································································ 3

1.1      起动PIPELINE STUDIO····································································································· 3

1.2      使用PIPELINE STUDIO····································································································· 3

1.3      打开和关闭组态文件·········································································································· 4

1.4      保存组态文件··················································································································· 5

1.5      输入关键字文件················································································································ 6

1.6      输入关键词文件················································································································ 6

1.7      输出组态文件作为关键词文件······························································································ 7

1.8      退出PIPELINE STUDIO····································································································· 8

1.9      练习1A:·························································································································· 8

1.10    练习1B:·························································································································· 8

1.11    增加网络元件或管线·········································································································· 8

1.12    建立管网······················································································································· 10

1.13    管网对象······················································································································· 11

1.14    使用Grid和Snap··········································································································· 12

1.15    缩放和平拉···················································································································· 12

1.16    对象尺寸······················································································································· 13

1.17    翻转和旋转对象·············································································································· 13

1.18    旋转对象······················································································································· 13

1.19    移动对象······················································································································· 13

1.20    断开节点······················································································································· 14

1.21    练习 1C:······················································································································· 14

1.22    有关图象节点················································································································· 17

1.23    用图象节点画图·············································································································· 17

1.24    运行静态仿真················································································································· 18

1.25    运行瞬态仿真················································································································· 18

1.26    图形输出和书签设定········································································································ 19

1.27    其它有关提示：·············································································································· 21

1.28    经常提到的问题·············································································································· 22

2    Lab 2  PIPELINE STUDIO输入······················································································ 24

2.1      用网络视图进行工作········································································································ 24

2.2      用节点工作···················································································································· 24

2.3      设定节点粘接距离··········································································································· 25

2.4      编辑对象属性················································································································· 25

2.5      练习 2A:······················································································································· 26

2.6      工作网络评估················································································································· 26

2.7      练习 2B:······················································································································· 27

2.8      表格视图······················································································································· 27

2.9      使用新表格向导·············································································································· 31

2.10    利用插入页面向导··········································································································· 32

2.11    关于表格视图使用Find 和 Replace 以及 Set To 和 Set To Initial··········································· 32

2.12    练习 2C:······················································································································· 34

2.13    用流体工作···················································································································· 34

2.14    以用户属性工作·············································································································· 35

2.15    用属性视图···················································································································· 37

2.16    练习2D:························································································································ 37

2.17    用单位工作···················································································································· 37

2.18    利用单位管理者·············································································································· 39

2.19    练习 2E:······················································································································· 39

2.20    有关属性视图················································································································· 40

2.21    用属性视图工作·············································································································· 40

2.22    有关提示：···················································································································· 42

2.23    经常提到的问题：··········································································································· 43

3     Lab 3  PIPELINE STUDIO的附加特点············································································ 45

3.1      使用PIPELINE STUDIO的帮助························································································· 45

3.2      锁住帮助主题················································································································· 46

3.3      显示帮助主题用作对话、窗口或视图··················································································· 46

3.4      导航帮助系统················································································································· 46

3.5      打印帮助主题················································································································· 46

3.6      设定帮助选项················································································································· 47

3.7      用报表和输出工作··········································································································· 47

3.8      发送 e-mail··················································································································· 48

3.9      技术支持······················································································································· 48

3.10    练习 3A:······················································································································· 49

3.11    插入对象······················································································································· 49

3.12    作为背景对象设定对象····································································································· 50

3.13    移动旧的输出文件··········································································································· 51

3.14    利用 File Maintenance 公用程序······················································································· 51

3.15    工具栏·························································································································· 51

3.16    练习3B:························································································································ 54

3.17    用仿真工作···················································································································· 54

3.18    设定先进的仿真控制········································································································ 54

3.19    设定选项······················································································································· 55

3.20    使用旧的文件管理··········································································································· 55

3.21    练习 3C:······················································································································· 56

3.22    相关提示：···················································································································· 56

3.23    常见问答：···················································································································· 57

4    Lab4 PIPELINE STUDIO输出························································································ 59

4.1      设定墙纸背景················································································································· 59

4.2      设定网络视图性质··········································································································· 59

4.3      用颜色工作···················································································································· 60

4.4      设定颜色图案················································································································· 61

4.5      练习4A:························································································································ 61

4.6      设定视图选项················································································································· 62

4.7      显示/隐含状态栏和工具栏·································································································· 62

4.8      使用Find用于网络视图···································································································· 63

4.9      用数据块工作················································································································· 64

4.10    使用数据块向导·············································································································· 65

4.11    编辑数据块···················································································································· 65

4.12    移动数据块···················································································································· 66

4.13    删除数据块···················································································································· 66

4.14    用格式化画笔················································································································· 67

4.15    练习4B:························································································································ 68

4.16    瞬态考虑······················································································································· 68

4.17    建立瞬态方案················································································································· 69

4.18    用趋势图工作················································································································· 70

4.19    重新起动瞬态方案··········································································································· 70

4.20    运行仿真器里多个组态文件······························································································· 70

4.21    练习 4C:······················································································································· 71

4.22    用仿真工作···················································································································· 71

4.23    使用外形轮廓向导··········································································································· 73

4.24    利用外形轮廓················································································································· 75

4.25    练习4D:························································································································ 75

4.26    打印网络视图················································································································· 75

4.27    打印表格视图················································································································· 76

4.28    工作报表······················································································································· 77

4.29    练习 4E:······················································································································· 78

4.30    有关提示：···················································································································· 80

5       Lab 5 PIPELINE STUDIO仿真原理··············································································· 81

5.1      流量方程······················································································································· 81

5.2      一般  方程:····················································································································· 81

5.3      AGA方程······················································································································ 81

5.4      Colebrook-White 方程····································································································· 82

5.5      Panhandle A:················································································································· 83

5.6      Panhandle B:················································································································· 83

5.7      Weymouth:···················································································································· 84

5.8      气体流体······················································································································· 84

5.9      流体质量一般相关··········································································································· 85

5.10    气体可压缩性和密度一般相关··························································································· 85

5.11    BWRS 状态方程用于可压缩性气体····················································································· 85

5.12    气体的重度和热值··········································································································· 86

5.13    气体比重和热值的BWRS 状态方程···················································································· 86

5.14    气体热容（一般相关）····································································································· 86

5.15    流体质量BWRS 状态方程································································································ 86

5.16    在TGNET 里的温度跟踪和热传递······················································································ 86

5.17    练习 5A:······················································································································· 98

5.18    仿真选项······················································································································· 98

5.19    练习 5B:······················································································································ 105

5.20    有关性质跟踪················································································································ 105

5.21    文件命名贯例················································································································ 106

5.22    压缩机、驱动器曲线······································································································· 106

5.23    压缩机组和站················································································································ 107

5.24    有关驱动器··················································································································· 107

5.25    用驱动器工作················································································································ 107

5.26    用压缩机组工作············································································································· 108

5.27    用站工作······················································································································ 109

5.28    用特性曲线工作············································································································· 110

5.29    用往复式特性曲线标识符（CPIDs）工作 （往复式 CPID’s）················································ 111

5.30    气缸工作······················································································································ 113

5.31    用驱动特性曲线标识符工作（DPIDs）工作········································································· 114

5.32    用透平特性曲线标识符（TPIDs）工作··············································································· 115

5.33    模型的一般提示和建立网络······························································································ 116

PIPELINE STUDIO培训

生产

欢迎来到PIPELINE STUDIO, ENERGYSOLUTIONS INTERNATIONAL 公司具有现代艺术图形环境可为气体和液体管网进行稳态和瞬态水力分析。

在PIPELINE STUDIO内众多的仿真工具集成在一个图形环境下，所以可以利用稳态和瞬态模型，在Windows里进行组态，执行和分析气体和液体管网环节。

PIPELINE STUDIO是我们工业上证实气体和液体仿真的最新版本，它们分别是TGNET 7.1 和 TLNET 7.2。

管网模型可以简单也可以复杂。有各种标高外形和各种形式的设备。当大量数据进入程序的时候，可用代表管线和真实设备的符号，用熟悉的拖动和下拉技术建立网络。且对有上下文相关的错误报告快速进入程序管网进行确认。

用户

这个PIPELINE STUDIO培训课程是个入门课程，给产品最初用户或想通过PIPELINE STUDIO成为有生产能力的人而设置的。

PIPELINE STUDIO培训课程的目的是给配管工程师、技术员或专业技术人员提供熟练技术，并熟悉产品。使得他们提高生产力和有效地使用产品。

培训

PIPELINE STUDIO培训提供实验室型的环境，其意图使培训人员相互配合，高效率。目的保持学生的兴趣和高度注意力。

你也许记得大学生或学院里化学课程是很凌乱的。在你不愉快时，经过学习有关的基础概念理论以后，全景实验或有时其他方式缠绕着你。PIPELINE STUDIO的培训是有方法的有条有理的，使得用户能够从现有的实验室和培训有关的强有力的知识里获得技能，讲课、讨论都与实验相结合。

shamofeiou

感谢分享~~楼主好人啊。

bkqcycyqm

楼主发帖辛苦了。

tianshihuilang

好东西，顶顶顶

tianshihuilang

好东西，顶顶顶顶

xiaoxuexue

很好的东东哦，谢谢楼主

guoshaguo

好东西 顶下你