ABS系列 - COATING PERFORMANCE STANDARD (CPS)

sishui

1 General
1.1 Scope and Application
This Guide has been developed with the objective of promoting the effective use of Type Approved
protective coatings on ABS-classed vessels. The requirements as specified in this Guide are additional to
all other relevant requirements of ABS Rules and Guides. Vessels and marine structures designed, built,
and coated in full compliance with the International Regulations, standards, guidelines, and recommendations
as listed in 1.3 below may be assigned a class notation CPS, Coating Performance Standard.
1.2 Abbreviations
The following abbreviations are used through this Guide:
CPS Coating Performance Standard notation or general reference to this Guide.
CSR Common Structural Rules, see ABS Rules for Building and Classing Steel Vessels, Part 5A
(Double Hull Oil Tankers) and Part 5B (Bulk Carriers).
CTF Coating Technical File
IACS International Association of Classification Societies
IACS PR34 IACS Procedural Requirement No. 34
IACS UR Z17 IACS Procedural Requirements for Service Suppliers
IMO PSPC IMO Resolution MSC.215(82) – Performance Standard for Protective Coatings for Dedicated
Seawater Ballast Tanks in All Types of Ships and Double Side Spaces of Bulk Carriers
1.3 Basis of Notation
It is a prerequisite for receiving the class notation CPS that the applicable requirements of the following
are fully complied with:
i) SOLAS Regulation Chapter II-1/3-2, Consolidated Edition 2004, amended by IMO Resolution
MSC.216(82)
ii) IMO Resolution MSC.215(82) Performance Standard for Protective Coatings for Dedicated
Seawater Ballast Tanks in All Types of Ships and Double-Side Skin Spaces of Bulk Carriers
(IMO PSPC)
iii) IACS PR No. 34, IACS Procedural Requirement on Application of the IMO Performance Standard
for Protective Coatings (PSPC), Resolution MSC.215(82), under IACS Common Structural Rules
for Bulk Carriers and Oil Tankers
iv) IACS UI SC223, IACS Unified Interpretation For Application of SOLAS Regulation II-1/3-2
Performance Standard for Protective Coatings(PSPC) for Dedicated Seawater Ballast Tanks in All
Types of Ships and Double-side Skin Spaces of Bulk Carriers, adopted by Resolution MSC.215(82)
to vessels other than CSR for Bulk Carriers and Oil Tankers
v) IACS UR Z17, IACS Procedural Requirements for Service Suppliers
vi) IACS Common Structural Rules for Bulk Carriers and Oil Tankers (see ABS Steel Vessel Rules
Part 5B and Part 5A)
In those instances where the flag Administration has specific mandatory national regulations regarding
coating protection, documentation confirming compliance with these regulations is to be submitted and
considered to be fundamental to the CPS notation.
2 ABS GUIDE FOR THE CLASS NOTATION COATING PERFORMANCE STANDARD (CPS) . 2009
1.4 Effective Date
1.4.1 SOLAS II-1/3.2 Application
These reviews check for compliance with the requirements of Protective Coatings for Dedicated
Seawater Ballast Tanks as driven by SOLAS II-1, A-1/3-2 adopted by the IMO Resolution
MSC.215(82) (hereinafter called “IMO PSPC”), as interpreted by IACS UI SC223 together with
any special instructions that may have been issued by the flag Administration. Compliance with
the Performance Standard of the IMO PSPC is mandatory for all ships 500 gross tonnage and
above for all dedicated seawater ballast tanks arranged in all ships and double-side skin spaces
arranged in bulk carriers of 150 meters in length and upwards for which:
• The building contract is placed on or after 1 July 2008; or
• In the absence of a building contract, the keels of which are laid or which are at a similar stage
of construction on or after 1 January 2009; or
• Regardless of the applicability of the above two criteria, the delivery of which is on or after
1 July 2012.
This process begins upon receipt of plans and data from a client requesting ABS issuance of a
Cargo Ship Safety Construction Certificate, which may be confirmed on the request for ABS
classification. It ends with the return of plans to the client, stamped appropriately to indicate ABS
review in accordance with this guide.
1.4.2 CSR Vessel Application
These reviews check for compliance

---

ABS系列 - COATING PERFORMANCE STANDARD (CPS).pdf (302.23 KB, 下载次数: 0, 售价: 3 金币)

2012-3-6 14:54 上传

点击文件名下载附件