|
这是一个用于计算立式气液两相分离器在线计算程序，基于Souders Brown公式，对有除雾器或没有除雾器的立式气液分离器，进行尺寸设计和计算，K值可通过GPSA方法、液滴尺寸方法和用户输入来获得。This program does the design sizing and calculation for a vertical gas liquid separator with or without Mesh Pad based on Souders Brown Equation. K Values can be estimated based on GPSA method, Droplet Size and on user input.
数据输入(Data Input)气体(Vapor)
质量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
液体(Liquid)
质量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
时间(Time)
停留时间(Holdup Time)
min
缓冲时间(Surge Time)
min
K值(K Value) 选择(Select)
压力(Pressure)
Bar G
要求(Requirement)
K值(K-Value)
m/s
出口速度(Terminal Velocity):Vt
m/s
设计速度(Design Velocity)
% of Vt
管嘴(Nozzle Sizing)
进料ρV(Feed In, ρV)
Kg/m.s
出口气体ρV(Vapor Out, ρV)
Kg/m.s
出口液体VMax(Liquid Out,VMax)
m/s
L/D比(L/D Ratio)
所需L/D(L/D Required)
解决方案Solution
单位Unit
基本配置 直径Diameter 1100mm 长度Length 3300mm 除雾器直径(Mesh Dia.)700mm H 低液位(H Low Level Liquid)150mm H 停留(H Holdup)1000mm H 缓冲(H Surge)600mm H 高液位到入口(H HLL to Inlet)600mm H 分离高度(H Diseng. Height)500mm H 除雾器(H Mist Elim.)150mm H 除雾器到顶部(H Mist Elim. to Top)300mm 管嘴配置 物料进口(Feed Inlet)200mm 气体出口(Vapor Outlet)200mm 液体出口(Liquid Outlet)40mm 最小水平长度(Minimum Horizontal Length) 停留所需(For Holdup)596mm 缓冲所需(For Surge)596mm |
|关于我们|网站地图|油气储运网
( 鲁ICP备11007657号-3 )
GMT+8, 2024-11-21 14:26 , Processed in 0.018794 second(s), 9 queries , Gzip On, MemCached On.
Powered by Discuz! X3.5
Copyright © 2001-2023, Tencent Cloud.
